Precision double-slitter line
Turns master coils into precisely sized strips. Two slitter heads let one set of knives run while the next is set up.
- Material thickness
- 0.3–2.5 mm
- Coil weight
- ≤ 15 t
Hongzhong MachineryHZ-FT-1600*2-SS-003
Slitting and cut-to-length lines, built in Foshan.
We design and build coil processing lines for stainless, carbon, galvanized, aluminum and copper coil. Tell us your coil and the strip or sheet you need, and we configure the line around it.
Slit a 1,250 mm coil into strips
Each strip mm
An illustration of a typical slitting line. Your line is configured for your coil width, thickness and output.
Equipment
Six line types from our catalogue. Each is built to your coil width, thickness range and output.
Rotary cut-to-length line
Levels coil and cuts it into sheets with a rotary shear, then stacks them. Built around the 1600 series.
- Series
- 1600
- Sheet length
- 500–4000 mm
Hongzhong MachineryHZP-1600*3-SS-010
Galvanized coil slitting line
Slits galvanized and coated coil into strips, with a belt tension unit ahead of the recoiler to protect the surface.
- Material thickness
- 0.3–2.0 mm
- Coil width
- 1400 mm
Hongzhong Machinery1400 series
HZ-850 single-slitter line
A compact line for aluminum, copper and steel coil. Can be combined with a cut-to-length section.
- Series
- 850
- Materials
- Aluminum, copper, steel
Hongzhong MachineryHZ-850
Slitting and cut-to-length combination line
Levels, slits and cuts to length on one line, for plants that need both strip and sheet from the same coil.
- Processes
- Leveling, slitting, cut-to-length
- Output
- Strip and sheet
Hongzhong MachineryCombination
Heavy-gauge leveling cut-to-length line
Levels thicker coil with a precision leveler and cuts it into flat plates.
- Material thickness
- Up to 6 mm
- Coil width
- 1650 mm
Hongzhong Machinery1650 series
What runs through your plant?
The material decides the knives, the tension system and the surface protection. These are the details we ask for first.
| Material | Tell us |
|---|---|
| Stainless steel | Grade, surface finish, protective film |
| Carbon and cold-rolled steel | Thickness range, yield strength, output per shift |
| Galvanized and coated steel | Coating type, surface protection, strip edge quality |
| Aluminum and copper | Alloy, temper, burr tolerance |
How a project runs
Lead time, payment and installation scope are agreed in the contract for each line.
- 1
Project brief
You send material grade, thickness, coil width and weight, finished size and output.
- 2
Technical proposal
We propose the line configuration, main components and a layout for your building.
- 3
Manufacturing
The line is built and assembled in our Foshan factory.
- 4
Factory trial
We run the line before shipment. Video inspection is available.
- 5
Delivery and start-up
Shipping, installation and commissioning support as agreed in the contract.
Our factory in Foshan
Foshan Hongzhong Machinery Equipment Co., Ltd. builds slitting lines, leveling and cut-to-length lines and flying shears. You talk directly with the people who build your line.
- Location
- Foshan, Guangdong, China
- Before shipment
- Trial run, video inspection available
- Languages
- English and Chinese
Send us your coil. We will send you a line.
Material, thickness, coil width and weight, and the strip or sheet you need. That is enough to start.
Start a project brief